Description
For reference only. No longer available. Sold at $1.50 a piece.
Fall 2014 Murrini Style #s 34, 89, 1011, 1415, 1617, 1819, 2930
Each murrini contains both striking and reduction colors. One single cane is 50 mm in length and 3-7 mm in diameter.
| Style # | Core Color | Optic Mold | Layer Color | Cane Pickup |
| 1011 | AX-598 | 10 Pickup | Terranova 2.1 | Psyche dark single stripe
SK-602 single stripe |
| 89 | Terranova 2.1 | 10 Pickup with Euros | AX-598 | SK-602 double stripe
Kalypso single stripe |
| 34 | Terranova 2.1 | Double Daisy | AX-598 | Psyche Dark Double Stripe
Terranova Light Single Stripe |
| 1415 | Terranova 2.1 | 6 Star | AX-598 | Kalypso single stripe
Psyche dark single stripe |
| 1617 | Terranova 2.1 | 16 star | AX-598 | Terranova light single stripe
SK-602 single stripe |
| 1819 | AX-598 | 16 star | Terranova 2.1 | Terranova Light single stripe
Triton single stripe |
| 2930 | AX-598 | 6 star | Terranova 2.1 | Psyche Dark single stripe
Euros single stripe |
For Best Results
Cut murrini to your desired length with disc nippers.
Preheat Murrini by placing on graphite marver on top of annealing oven, this helps prevent thermal shock
To Apply Murrini
-spot heat the bead where you will be placing the Murrini
-pick up Murrini using tweezers and push it into the preheated spot
-gently warm the Murrini in a soft bushy flame, this step helps prevent thermal shock
-gently heat the Murrini in a small flame
-using a smooth steel or graphite tool press the Murrini flat onto the bead
-gently fire polish to remove chill marks
-if desired reduce and/or encase.
One single cane is 50 mm in length and 3-7 mm in diamter. After experimenting we found that 50 millimeters will allow you to cut the murrini to length cold or hot and still provide a variety of styles in each ounce.
For Best Results
Cut murrini to your desired length with disc nippers.
Preheat Murrini by placing on graphite marver on top of annealing oven, this helps prevent thermal shock
To Apply Murrini
-spot heat the bead where you will be placing the Murrini
-pick up Murrini using tweezers and push it into the preheated spot
-gently warm the Murrini in a soft bushy flame, this step helps prevent thermal shock
-gently heat the Murrini in a small flame
-using a smooth steel or graphite tool press the Murrini flat onto the bead
-gently fire polish to remove chill marks
-if desired reduce and/or encase.
Reviews
There are no reviews yet.